Shenzhen Olycom Technology Co., Ltd.
Professional Fiber Optic Transmission Equipment Manufacturer
Add to Cart
Managed Poe Gigabit Switch 12SFP Fiber 12UTP Ports 1U Rack For Outdoor Use
Introduction
IM-FP121212GW series is the industrial Managed Poe Gigabit Switch, comply with IEEE802.3af/at, power on POE IP cameras through the Ethernet cable, operating temperature-40 ℃to + 85℃, support wide voltage dual power input, meet IP30 protection degree and EMC industrial grade requirements, support many managed functions, include RSTP IGMP, VLAN, Qos, IPV6, Loop protection, ERPS, RMON, MIB II, mirror image, event log, DNS, NTP/SNTP, IEEE802.1ab LLDP, IPV6 Telnet server /ICMP v6, SNMP, HTTP, SSH/SSL, NTP/SNTP,TFTP, QoS, ACL and so on. pass through dangerous environmental certification and comply with FCC and CE standards.
Key Features
Support power on POE IP cameras through the wireless access point (AP) of 5 categories of Ethernet cable
IEEE 802.3af/at power on to 1 ~ 12 RJ45 ports
Support cable diagnosis and can locate the fault point
Support IEEE802.3az EEE (Energy Efficient Ethernet) Management, optimize power consumption
Support STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR)
Support Qos, transport classification Qos, Cos, bandwidth control (input/output direction), storm suppression ,differentiated services
Support IEEE802.1q VLAN,VLAN port ,based Mac VLAN,IP subnet VLAN, Protocol VLAN,VLAN convert, MVR
Support dynamic IEEE802.3ad LACP link aggregation, static link aggregation
Support IGMP/MLD snooping V1/V2/V3, IGMP filtrating/ modulating, IGMP searching
Support IGMP agent report, MLD snooping
Safety: based on port and Mac IEEE802.1X, RADIUS, ACL, TACACS+,HTTP/HTTPS, SSL/SSH v2
Support Cisco® like CLI, Web management, SNMP v1/v2c/v3, Telnet
Support software upgrade via TFTP and HTTP, firmware redundancy prevents upgrade failing
Support DHCP client/Relay/Snooping/Snooping option 82/Relay option 82
Spectification
| Product Name | Managed Poe Gigabit Switch(12F+12TP) |
| Model No. | IM-FP121212GW |
| Port | 12 x 1000Mpbs SFP ports 12x10/100/1000M UTP RJ45 |
| Standard | IEEE 802.3, IEEE802.3U, IEEE802.3ab, IEEE802.3z, IEEE802.1d STP, IEEE802.1w RSTP, IEEE802.1s MSTP, ITU-T G.8023 EPR/Y.1344, IEEE802.1Q, IEEE802.1X, IEEE802.3ad, IEEE802.3x, IEEE802.3af, IEEE802.3at, IEEE802.1ad, IEEE802.1p, IEEE802.1ab, IEEE802.3az |
| VLAND ID | 4096 |
| Jumbo Frame | 9.6KB |
| MAC Address Table Size | 8K |
| Poe Standard | IEEE802.3af, total MAX power is 340W |
| Switching features | Transmission mode:storage and forward System bandwidth:48Gbps (non-traffic jam) |
| Network media | 10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) SFP port,transmission distance: 20Km,40Km,60Km,80Km,100Km |
| LEDs | Power, network, fiber |
| Power supply | Input voltage:DC48V Non-polar power input :support |
| Environment | Working temperature:-40°～ 85°C Working humidity:5%～95%,non-condensing |
| Industry Standards | EMI:FCC Part 15 Subpart B Class A,EN 55022 Class A, EN61000-6-4- Emission for industrial environment EMS:EN61000-6-2-Immunity for industrial environment, EN 61000-4-2 (ESD) Level 3,EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3,EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3,EN 61000-4-8 Traffic Control:NEMA-TS2, Vibration:IEC 60068-2-6 Freefall:IEC 60068-2-32, Shock:IEC 60068-2-27 Rail Traffic:EN 50121-4 |
| Mechanical information | Safety class:IP30 Dimension:483x 275 x 44.5mm |
| Warranty | Replacement within 1year; 5 years repairing |
Application
Installation
1. Whether the power supply of the PoE port meets the power requirements of the access device;
2. The PoE standard requires that the power supply mode matches the connected POE powered device (end-span/mid-span);
3. Whether the output power of the matching power adapter is consistent with the switch label specification.
4. If it is a standard PD powered device, the e end-span/mid-span can be accessed.
Follow these steps to install the switch:
1. Place the switch on a large enough and stable desktop or on a solid track;
2. Connect the power adapter to the power connector and connect it to the power socket through the power cable.
3. Connect the network device to the corresponding port of the switch through a network cable.