5 x 10/100/1000Mbps Auto-sensing RJ45 ports
6KV Ethernet surge protection, adapt to a harsh outdoor environment Support Auto MDI/MDIX
Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard
IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant A store-and-forward switching mechanism
Operating environment temperature: -40°c~75°c

Specification of Industrial E Mark Ethernet Switch

Product Name	10/100/1000Mbps Industrial Ethernet Switch(5TP)
Model No.	IM-WS050GE
Port	5 x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing)
Switching features	Transmission mode: storage and forward System bandwidth:10Gbps (non-traffic jam)
Network media	10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m)
LEDs	Power, network
Power supply	Input voltage: DC 12-52V No-load power: 5W Reverse connection: support
Environment	Working temperature:-40°～ 75°C Storage temperature:-40°～ 85°C Working humidity:10%～90%,non-condensing Storage humidity:10%～95%,non-condensing
Industry Standards	EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A EMS: EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3, EN 61000-4-8 Traffic Control:NEMA-TS2 Vibration:IEC 60068-2-6 Freefall:IEC 60068-2-32 Shock: IEC 60068-2-27 Rail Traffic:EN 50121-4
Safety	CE Mark, commercial, E-mark CE/LVD EN60950
Mechanical information	Shell: Corrugated metal shell Safety class: IP40 Dimension:114 x 93 x 35mm Mounting method: Din-rail mounting
Warranty	Replacement within 1 year; 3 years repairing

Application of E-Mark Certified Ethernet Switch

Dimension of 5-port Gigabit switch

Packing box of Din rail unmanaged switch

Put the product in an ESD Bag, then placed in PE foams with outer carton packaging.
The standard packing usually contains a main device, a warranty card and a user manual.
Packing box dimension for 1pc: 23*16.5*5.8cm
40pcs in a packing box of 67*33*47cm dimension.

Production steps

Welding: Weld the necessary components
Cleaning: To avoid any possible dysfunction due to dust or scraps on the PCB boards.
Assembling: Builds up components of a product, like panels, screws, PCB boards.
Testing: To make sure the product is basically working fine after assembling
Aging: To check if the product can work smoothly for long time without any minors such as LED indicators, voltage. This will usually last for 24 to 48 hours.
Testing: To test if the product can process data or video signals correctly. Any data loss? Transmission rate correct? Any data packet failure? Such questions would be verified in this procedure.
QC testing: This is the third and also last check of product quality. If it goes good, our packing staff will pack it up according to customer requirements and attach to the packing box a product label.
When all above is done, the product will go to market.

E-Mark Certified 5 Port Ethernet Switch Industrial Wide Temp Unmanaged 12V 24V

Industrial Network Switch