Support power on POE IP cameras through the wireless access point (AP) of 5 categories of Ethernet cable.
IEEE 802.3af/at power on to 1 ~ 4 RJ45 ports
4 x 10/100/1000Mbps Auto-sensing RJ45 ports
1 x 10/100/1000Mbps uplink network port
Built-in voltage booster for DC12-48V input which can be used for solar power/Trunk/VoIP system/CCTV security system
6 KV Ethernet surge protection, adapt to a harsh outdoor environment
Support Auto MDI/MDIX
Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard
IEEE 802.3 10Base-T and IEEE 802.3u 1000Base-TX compliant
Max power to15.4W under af standard, 30W under at standard to each PoE port
Detect the PoE models of electrical equipments.
Operating environment temperature:-40 ° ~75 ° c

Specification of Industrial 5 port Ethernet Switch

Product Name	10/100/1000Mbps Industrial POE Network Switch (5TP)
Model No.	IM-WP054BGE
Port	1 x 10/100/1000Mpbs uplink network port 4 x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing)
Switching features	Transmission mode:storage and forward System bandwidth:40Gbps (non-traffic jam)
Network media	10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m)
LEDs	Power, network
Power supply	POE power supply input voltage: DC1V2-48V Single PoE power supply output power: 15.4W (port 1~4) (802.3at standards required special instructions)
Environment	Working temperature:-40°～ 75°C Storage temperature:-40°～ 85°C Working humidity:10%～90%,non-condensing Storage humidity:10%～95%,non-condensing
Industry Standards	EMI:FCC Part 15 Subpart B Class A,EN 55022 Class A EMS:EN 61000-4-2 (ESD) Level 3,EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3,EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3,EN 61000-4-8 Traffic Control:NEMA-TS2 Vibration:IEC 60068-2-6 Freefall:IEC 60068-2-32 Shock:IEC 60068-2-27 Rail Traffic:EN 50121-4
Safety	CE Mark ,commercial CE/LVD EN60950
Mechanical information	Shell:Corrugated metal shell Safety class:IP40 Dimension: 113.8 x 93 x 34.9mm Mounting method:Din-rail mounting
Warranty	Replacement within 1 year; 3 years repairing

Dimension of 5-port Gigabit switch

Packing box of Din rail unmanaged switch

Put the product in an ESD Bag, then placed in PE foams with outer carton packaging.
The standard packing usually contains a main device, a warranty card and a user manual.
Packing box dimension for 1pc: 23*16.5*5.8cm
40pcs in a packing box of 67*33*47cm dimension.

Production Steps

Welding: Weld the necessary components
Cleaning: To avoid any possible dysfunction due to dust or scraps on the PCB boards.
Assembling: Builds up components of a product, like panels, screws, PCB boards.
Testing: To make sure the product is basically working fine after assembling
Aging: To check if the product can work smoothly for long time without any minors such as LED indicators, voltage. This will usually last for 24 to 48 hours.
Testing: To test if the product can process data or video signals correctly. Any data loss? Transmission rate correct? Any data packet failure? Such questions would be verified in this procedure.
QC testing: This is the third and also last check of product quality. If it goes good, our packing staff will pack it up according to customer requirements and attach to the packing box a product label.
When all above is done, the product will go to market.

4 Port POE Voltage Booster DC12-48V Input For Solar Power With 1 Uplink Network Port Switch

Industrial Network Switch