Shenzhen Olycom Technology Co., Ltd.
Professional Fiber Optic Transmission Equipment Manufacturer
Add to Cart
8 Port Poe Switch with 90W managed
2*2.5Gb SFP ports+2 combo ports POE fiber switch
Key Features of 90w industrial managed switch
▪ 8x 10/100/1000Base-T RJ-45 and 2x 100/1000/2500Base-FX SFP Fiber
▪ 2 Copper/MSA Fiber Combo ports ( Port 9, 10, and FX1, FX2)
▪ Supports negative RS-232 console port
▪ Support POE af/at/bt for port 1-8, each network port can reach 90W max. Total POE budget is 720W.
▪ Cable diagnostic, Measuring cable normal or broken point distance
▪ Input 100-240VAC
▪ STP, RSTP, MSTP, ITU-T G.8032 Ethernet Ring Protection Switching (ERPS) for redundant cabling
▪ Supports Green Ethernet IEEE802.3az EEE (Energy Efficient Ethernet) management to optimize the power consumption
▪ DHCP Server/Client/Relay/Snooping/Snooping option 82/Relay option 82
▪ QoS, Traffic classification QoS, CoS, bandwidth control for Ingress and Egress, Storm Control, DiffServ
▪ IEEE802.1q VLAN, MAC based VLAN, IP subnet based VLAN, Protocol based VLAN, VLAN translation, GVRP, MVR
▪ Dynamic IEEE 802.3ad LACP Link Aggregation, Static Link Aggregation
▪ IGMP snooping V1/V2/V3, IGMP Filtering/ Throttling, IGMP query, IGMP proxy reporting, MLD snooping V1/V2
▪ Security : Port based and MAC based IEEE802.1X, RADIUS, ACL, TACACS+, HTTP/HTTPS, SSL/SSH v2
▪ Software upgrade via TFTP and HTTP, redundant firmware to avoid in case of upgrade failure
▪ Supports IEEE1588 PTP V2 for precise time synchronization to operate in Ordinary-Boundary, Peer to Peer Transparent Clock, End to End Transparent Clock, Master, Slave mode by each port
▪ RMON, MIB II, Port mirroring, Event syslog, DNS, NTP, IEEE802.1ab LLDP
▪ Supports IPv6 Telnet server /ICMP v6
▪ CLI, Web based management, SNMP v1/v2c/v3, Telnet server for management
Specification of Industrial 8 port POE Switch
| Product Name | 10/100/1000Mbps Managed POE Fiber Switch (2F+10TP) |
| Model No. | OM-FPH21008GW |
| Port | 2x 100/1000/2500Base-FX SFP Fiber SM:1310nm/1550nm,20Km ;1490nm/1550nm, 40~120Km; MM:1310nm, 2Km; 8x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Standard | IEEE 802.3: 10Base-T 10Mbit/s Ethernet IEEE 802.3u: 100Base-TX, 100Base-FX, Fast Ethernet IEEE 802.3z: 1000Base-T Gbit/s Ethernet over fiber optic IEEE 802.1d: STP (Spanning Tree Protocol) IEEE 802.1s: 100Base-TX, 100Base-FX, Fast Ethernet IEEE 802.1w: RSTP (Rapid Spanning Tree Protocol ) ITU-T G.8032 :ERPS (Ethernet Ring Protection Switching) IEEE 802.1Q: Virtual LANs (VLAN) IEEE 802.1X: Port based and MAC based Network, Access Control, Authentication IEEE802.3ac: Max frame size extended to 9600Bytes. IEEE 802.3ad: Link aggregation for parallel links with LACP(Link Aggregation Control Protocol) IEEE 802.3x: Flow control for Full Duplex IEEE 802.1ad: Stacked VLANs IEEE 802.1p: LAN Layer 2 QoS/CoS Protocol for Traffic Prioritization IEEE 802.1ab: Link Layer Discovery Protocol (LLDP) IEEE 802.1az: EEE (Energy Efficient Ethernet) IEEE802.3af: 15.4W IEEE802.3at: 30W IEEE802.3bt: 90W |
| VLAND ID | 4096 IEEE802.1Q VLAN VID |
| Switch Architecture | Back-plane (Switching Fabric): 21Gbps Full wire-speed |
| Data Processing | Store and Forward |
| Flow Control | IEEE 802.3x for full duplex mode Back pressure for half duplex mode |
| Network Connector | 8x 10/100/1000Base-TX RJ-45 with POE AF/AT/BT Auto MDI/MDI-X function, |
| Console | RS-232 (RJ-45) |
| Network Cable | UTP/STP above Cat. 5e cable |
| Protocols | CSMA/CD |
| Reverse Polarity Overload Current Protection | Supported Supported |
| CPU Watch Dog | Supported |
| Power Supply | Input AC100-240VAC (Internal Power supply) |
| Power Consumption | 3.5W(no-load)
|
| LED | Per unit: Power 1 (Red), SYS (Red), Alarm (Red) PoE(Green) RJ-45 port: Link/Active (Green) Speed(Yellow) SFP Fiber port: Link/Active (Green) |
| Jumbo Frame | 9.6KB |
| IEEE802.3ac | Max frame size extended to 1522Bytes (allow Q-tag in packet) |
| MAC Address Table | 8K |
| Warning Message | System Syslog, alarm relay |
| Alarm Relay Contact | Relay outputs with current carrying capacity of 1 A @30VDC |
| Operating Temperature | -10 ~ 55°C |
| Operating Humidity | 0% to 95% (Non-condensing) |
| Storage Temperature | -40 ~ 85°C |
| Dimensions | 288 x 270 x 45.5mm |
| Weight | 0.85kg |
| Installation Mounting | Rack-mounted |
| FCC Emmission | CE FCC Part 15 Subpart B Class B 2010 EN50121 EN 5502:2006+A1:2007 EN61000-3 EN55035 EN55032 EN50155 2:2006+A1:2009+A2:2009 |
| Safety | EN62368 |
| 6KV Surge Protection | Supported for UTP and Fiber port |
| Shock | IEC 60068-2-27 |
| Freefall | IEC 60068-2-32 |
| Vibration | IEC 60068-2-6 |
Packing box of switch
Advantage:
1. Manufacturing: We are a powerful factory and has been in this industry about 10 years
2. Professional R＆D center: We have a professional and independent R＆D team. Most our engineers have more than 5 years experience.
3. Fast dispatch: Most of the products are in stock. Below 10pcs can arrange delivery with 3 days.
4. Small order accepted: Low MOQ accepted. 1pcs are available.
5. Reliable and Timely customer services;