Shenzhen Olycom Technology Co., Ltd.
Professional Fiber Optic Transmission Equipment Manufacturer
Add to Cart
EtherCAT Compact Standalone I/O Module
Key Features
Product Introduction
Specification
| Technical Specifications | |
| Working Voltage | 24VDC (voltage range 18VDC~28VDC) |
| Operating Current Loss | Based on different product models, please refer to the product manual for details |
| Power Protection | Anti reverse connection protection, surge absorption |
| Communication Interface | 2*RJ45 |
| Power Terminal Type | Plugged connector, screw wiring connection port |
| Signal Terminal Type | Plugged connector, straight in PUSH-IN wiring port |
| Display Indication | Power supply NET green indicator light SF red indicator light IO signal green indicator light |
| Protocol | EtherCAT |
| Master-slave categories | standalone slave devices |
| Main IO points | Yes, please refer to the ordering data for details |
| Overcurrent Protection Threshold | 1.5A, 5ms |
| IO Response Time | Minimum 500us |
| Scalability | Do not support Extension |
| Cable length (shielding) | Maximum 500m |
| Cable length (unshielded) | The maximum length of the input point is 300m, and the maximum length of the output point is 150m |
| Slave Station Settings | |
| Address Settings | Configuration by dial switch or master station |
| Maximum number of Stations per Segment | 255 (The specific number of supported stations is determined by the master station) |
| Work Environment | |
| Working Temperature | -20~60℃ |
| Working Humidity | 5%~90% (non-condensation) |
| Protection Grade | IP20 |
| Dimensions(l* w * h) | 27mm*94mm*114mm |
Ordering Details
| Specifications | Product No. |
| OM521S standalone module, EtherCAT bus, 2 RJ45 ports, 24VDC power supply, with 8-bit dial code to set station ID address, the product comes with 32DI (common anode/common anode input), does not support internal bus expansion module, IP20 protection level, supports DN35 din-rail installation |
OM521S-1BL22-ECT |
| OM522S standalone module, EtherCAT bus, 2 RJ45 ports, 24VDC power supply, with 8-bit dial code to set station ID address, the product comes with 32DO (PNP output), does not support internal bus expansion module, IP20 protection level, supports DN35 din-rail installation |
OM522S-1BL22-ECT |
| OM522S standalone module, EtherCAT bus, 2 RJ45 ports, 24VDC power supply, with 8-bit dial code to set station ID address, the product comes with 32DO (NPN output), does not support internal bus expansion module, IP20 protection level, supports DN35 din-rail installation |
OM522S-1NL22-ECT |
| OM523S standalone module, EtherCAT bus, 2 RJ45 ports, 24VDC power supply, with 8-bit dial code to set station ID address, the product comes with 16DI (common anode/common anode input) and 16DO (PNP output), does not support internal bus expansion module, IP20 protection level, supports DN35 din-rail installation |
OM523S-1BL22-ECT |
| OM523S standalone module, EtherCAT bus, 2 RJ45 ports, 24VDC power supply, with 8-bit dialing to set station ID address, the product comes with 16DI (common anode/common anode input), 16DO (NPN output), does not support internal bus expansion module, IP20 protection level, supports DN35 din-rail installation |
OM523S-1NL22-ECT |
| OM523S standalone module, SM523S standalone module, EtherCAT bus, 2 RJ45 ports, 24VDC power supply, with 8-bit dial code setting station ID address, the product comes with 16DI (common anode/common anode input) and 12DO (relay output), does not support internal bus expansion module, IP20 protection level, supports DN35 din-rail installation |
OM523S-1HJ22-ECT |
| OM524S standalone module, EtherCAT bus, 2 RJ45 ports, 24VDC power supply, with 8-bit dialing to set station ID address, the product comes with 16DI (common anode/common anode input) and 16DIO (NPN input/NPN output configurable, 2-way group configuration), does not support internal bus expansion module, IP20 protection level, supports DN35 din-rail installation |
OM524S-2NL22-ECT |
| OM525S standalone module, EtherCAT bus, 2 RJ45 ports, 24VDC power supply, with 8-bit dialing to set station ID address, the product comes with 16DO (NPN output) and 16DIO (NPN input/NPN output configurable, 2-way group configuration), does not support internal bus expansion module, IP20 protection level, supports DN35 din-rail installation |
OM525S-3NL22-ECT |
| OM526S standalone module, EtherCAT bus, 2 RJ45 ports, 24VDC power supply, with 8-bit dialing to set station ID address. The product is equipped with 16DIO (NPN type, 2-channel group configuration input or output), does not support internal bus expansion module, IP20 protection level, supports DN35 din-rail installation |
OM526S-1NH22-ECT (planning product) |
More Product Photos
FAQ
Are you a manufacturer?
Yes, we have our production line and R&D team.
Please visit us via below VR link to see our office and production area.
https://www.ecer.com/corp/uuu5b8d-industrialnetworkswitch/vr.html
What is the leadtime if I order?
After receiving the payment, we start production.
If you are ordering some popular models, we usually got stock. After some testings, we will ship the materials.
If we do not have stock, production time is usually 3~5 working days for less than 50pcs/pairs.
How will you ship my order?
We will send the goods by air(DHL, UPS or FEDEX) or by sea(for bulk order)
It is fine to ship purchased items via customer’s shipping account or forwarder.
It takes 3~5 calendar days to arrive at local customs for clearance.
Do you support OEM&ODM?
Yes, this is our competitive advantage.
There is a detailed introduction in the below link.
https://www.industrialnetworkswitch.com/factory.html
Do you attend some exhibitions?
Yes, we regularly attend IFSEC UK, MIPS RUSSIA, Security ESSEN GERMANY and ISC West USA.
Sometimes we are an exhibitor for some small shows like Mitec Malaysia, Secon Korea and Intersec Saudi Arabia.
Each time, we took many photos for displaying and record, please let us know if you need to check.