Support power on PoE IP cameras through the wireless access point (AP) of 5 categories of Ethernet cable.
IEEE 802.3af/at power on to 1 ~ 4 RJ45 ports
4 x 10/100/1000Mbps Auto-sensing RJ45 ports
1 x 10/100/1000Mbps uplink network port
Built-in voltage booster for DC12-48V input which can be used for solar power/Trunk/VoIP system/CCTV security system
6KV Ethernet surge protection, adapt to a harsh outdoor environment
Support Auto MDI/MDIX
Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard
IEEE 802.3 10Base-T and IEEE 802.3u 1000Base-TX compliant
Max power to15.4W under af standard, 30W under at standard to each PoE port
Detect the PoE models of electrical equipments.
Operating environment temperature: -40℃~75℃

Product Name	10/100/1000Mbps Industrial PoE Network Switch (5TP)
Model No.	IM-WP054BGE
Port	1 x 10/100/1000Mpbs uplink network port 4 x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing)
Protocol	IEEE 802.3(10Base-T) IEEE 802.3u(100Base-TX) IEEE 802.3ab(1000Base-TX) IEEE 802.3af 15.4W(PoE) IEEE 802.3at 30W(PoE+)
Switching features	Transmission mode: Storage and forward Forwarding delay: <10us System bandwidth: 10Gbps(non-traffic jam) Forwarding rate: 14.88Mpps MAC: 2K Packet buffer size: 1.75Mb
Network media	10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m)
LEDs	Power, Network PWR: Power Copper orange: Speed indicator On: Working speed is 1000Mbps Off: Disconnected or working speed is 10/100Mbps Copper green: Link/Act indicator On: transmission is normal Blinking: in transmission Off: transmission is NOT normal
Power supply	PoE power supply input voltage: DC12V-48V Single PoE power supply output power: 15.4W/30W (port 1~4) Total PoE budget: 120W PoE output voltage: DC48V, active PoE
Environment	Working temperature: -40°～75°C Storage temperature: -40°～85°C Working humidity: 10%～90%, non-condensing Storage humidity: 10%～95%, non-condensing
Industry Standards	ESD: IEC61000-4-2, ±15KV air, ±6KV contact EFT: IEC61000-4-4, General ±6KV Surge: IEC61000-4-5, Differential ±2KV, Common±6KV
Certification	CE-EMC: EN 55032:2015+AC: 2016+A1:2020+A11: 2020 EN 55035:2017+A11: 2020/EN IEC 61000-3-2:2019/A1: 2021 EN 61000-3-3: 2013/A2: 2021/AC:2022 CE-LVD: EN IEC 62368-1: 2020+A11:2020 FCC: 47 CFR FCC Part 15 Subpart B(Class B) ANSI C63.4: 2014
Warranty	3 years, lifetime technical support

Packing List

1pc switch
1pc user manual

Remark

Accessories(DIN rail bracket, power supply, network cable etc.)are NOT included in the packing box

Please prepare it by yourself or purchase a whole set from us

Shipping box information

Product size: 11.4*9.3*3.5cm

Inner box size: 23*16.5*5.8cm

Product weight: 0.35Kg

Packing weight: 0.45Kg

Master box size: 67*33*47cm

Packing quantity: 40Pcs

Packing weight: 20Kg

Application of Off-grid PoE Edge Switch

In a PoE system, most device receive DC48V or even higher voltage to be working, if it is just DC12V or DC24V, PoE will not work).

There is a built-in voltage step-up in IM-WP054BGE model boosting low DC input(typically DC12V~DC48V) from power adapter, UPS, battery power etc.

Then PoE will be activated for CCTV security scenarios.

Below are some popular applications

Solar power system
Vehicle Network
Residential CCTV security system

See following detailed explanation

For above scenarios, we have different mounting kits for easy installation.

Overall, IM-WP054BGE helps

1, Boost the DC12V/DC24V to DC48V

2, Smart communication with IP-based devices

Supply power to PoE devices

Only transmit networking signal with Non-PoE devices

It is an ideal solution for low voltage power surveillance system.

Mounting Method

Ordering Options

IM-WS050GE

Industrial Ethernet Switch

5*100/1000M, Unmanaged, Non-PoE, DC12V~DC52V dual input

Ideal in vehicle network or industrial automation system

IM-WP054GE

Industrial PoE Switch

5*100/1000M, Unmanaged, PoE af/at for port 1~4, 120W budget

DC48V~DC52V dual input

Remark: PoE bt*60W is optional

Ideal in CCTV security system

IM-WP054BGE

Industrial PoE Switch

5*100/1000M, Unmanaged, PoE af/at for port 1~4, 120W budget

DC12V~DC48V dual input

With internal power booster

Ideal in vehicle network or solar power system

IM-WPD054GE

Industrial PoE Switch

5*100/1000M, Unmanaged, 1*PD port(30W/60W/90W)+PoE af/at for port 1~4, No need to use extra power supply

Ideal in CCTV security system

IM-WS050GM

Industrial Web Managed Switch

5*100M/1000M, Web Managed(QoS, VLAN etc.), Non-PoE

DC12V~DC52V dual input

Ideal in industrial automation systems

FAQ

1, What chip is it based?

Olycom: Realtek

2, Can I customize it?

Olycom: Yes. We support OEM services like logo, model name, label, PVC mask and product parts(mounting kit, power terminal block etc.)

3, Can I connect it with 10/100M devices?

Olycom: Yes. All ports are 10/100/1000M auto-sensing

4, Do you do SKD/CKD?

A: Yes

As a factory, we have dealt with this many times.

Inquiry Cart 0